FREMO americaN Operations featured in the N Scale Railroading Magazine

A few members of the FREMO americaN group wrote an article for issue december 2020 issue of the N Scale Railroading Magazine. During a small modular meeting we took photos of the operations. We choose to follow a single train during operating session and explain the thoughts and operations in detail in this article.

Workshop-Weekend 2020: Rolling-Stock

Paints, powders, cars and small parts dominated this weekend. In January 2020 we had another Workshop-Weekend. We decided to add more cars to our arsenal and worked on our rolling stock. Some cars needed additional weight, new wheel sets or couplers.

A lot of weathering techniques were applied to the unsuspicious victims. No car should leave as clean as it arrived.

I replaced the motors in my Atlas EMD SD-24 because they didn’t work that well. After that I applied a my usual dirt-wash to about 60 cars that had been prepared with a good shot of matte varnish.

Building Cascade 11: Running out of time and kits

Close to the deadline set by our participation at the US Model Railroad Convention 2019 in Rodgau, I ran out of time and kits. I had the kit for a small diner at hand but I had seen this structure on at least two modules in our group and wanted to create a different version of it. So I had to improvise a solution to fill some spaces on my module.

Building Cascade 10: Modified Storage Shed

Like every second modeller, I had bought a sample of the Walthers “Co-Op Storage Shed”. I have seen it on some modules before, sometimes modified, sometimes not. I needed a ground level storage shed for a small business on my Cascade Module. Today the “Lake Cascade Sport & Marine” is located at that place. I have no Idea what has been there in the 1950s, but I chose this kit as a base to build my shed.

Building Cascade 9: Scratch building with left overs

South of East Mill Street in Cascade Idaho are some interesting buildings. At the far south of the town there is a Rodeo arena with its stables. Due to space limitations I decided not to model it, but I added a freelanced workshop and wanted to add the diner I already had bought.

Building Cascade 7: Going fency

Due to the selected level of compression, the lots are smaller – most of all shorter – than in the prototype. But even in the prototype some of the lots are quite narrow and accommodate a small house and a garage. I wanted to capture this look and feel and found some kits, that would help me to achieve that. 

Building Cascade 6: Renovation required

Opposite of the Cascade Depot there are multiple lots with either small business or private structures. The houses in Cascade near the railroad tracks are an interesting mix. Most of the houses are quite unique and do not repeat along the street. A few years ago I bought a few laser kits for different houses. Some of the kits either contained two or three samples of the same house or I simply bought multiples of them. So I had a good stock of parts to kit bash a nice variety of houses for my module.